Back to top
The Microfocus PatchRobot in its outdoor cabinet will speed up fiber optic roll-out processes.

Microfocus PatchRobot for fiber optic networks now also works in outdoor cabinets

8 May 2024: Netceed is now integrating the Microfocus PatchRobot into outdoor cabinets in addition to its already established Point of Presence (PoP) applications. Through this innovation, the world’s leading partner and one-stop shop for all active and passive materials is continuing to expand its technological leadership in the automation field. Following this pursuit, the new Microfocus PatchRobot for outdoor cabinets will join the ranks of the already established Microfocus PatchRobot in the PoP and the Microfocus PatchRobot in the NVt (network distributor), thus advancing automated processes at the switching points in fiber optic expansion. With a focus on sustainability in network operation, a lower total cost of ownership (TCO) and the provision of automated resources, Netceed is creating the ideal conditions for an investment- and therefore future-proof broadband expansion.

ANGA COM 2024: Netceed showcases the future of communication networks

6 May 2024 – Netceed, a leading global distributor and one-stop shop for all active and passive components and systems in the broadband industry, will display its complete network portfolio, technical know-how, service, and logistics solutions at ANGA COM 2024. As the largest telecom distributor in Europe and across 19 countries with more than 80 locations, Netceed offers future-proof complete solutions for successful FTTx broadband expansion. Netceed will be presenting its modular system of active and passive network components at Europe’s leading congress trade fair for broadband, television and online. From 14 to 16 May 2024, Netceed will turn the spotlight on technologies and automation solutions from the pre-assembled PoP (Point of Presence) through all levels of the fiber optic and HFC (Hybrid Fiber Coax) network to the end user connection on 264 square meters in Hall 8 at Stand A50.

tde presents tML Reverse Module

Dortmund/Germany, 25 April 2024. tde – trans data elektronik GmbH is adding a pioneering innovation to the tML system platform: with the new tML Reverse Module, the network specialist is the first manufacturer to offer a module that can be fitted on the platform in two directions. Meaning that patching is now also possible in the rear area. The same number of ports can be integrated at the front and rear with maximum packing density. The module is compatible with all standard connectors, including the new highly compact MDC connector.

tde is the first network expert in Europe to integrate the MMC connector from US Conec into its successful tML system platform, thereby doubling the packing density of its cabling systems.

First cabling platform with MMC connectors in the rear and patch area: tde presents tML 24+r

Dortmund, February 2, 2024. tde – trans data elektronik GmbH continues to drive forward its technological leadership in the modular cabling system field for maximum packing efficiency, investment security and simple migration currently up to 800 G and more: tde is the first network expert in Europe to integrate the MMC connector from US Conec into its successful tML system platform, thereby doubling the packing density of its cabling systems. Simultaneously, tde is presenting the new tML24+, an innovative solution based on the integration of the highly compact 24-fiber MMC multi-fiber connector in the rear area. tde also provides tML modules with MMC for the patch area: One module accommodates 24 MMC adapters at the front, each with 12, 16 or 24-fiber MMC connectors and therefore up to 4,608 fibers modularly on one height unit. Thanks to its APC angle-polished convex surface, even in the multimode version, the MMC offers improved performance in terms of insertion loss and return loss. Customers benefit from migration and investment-proof high-density applications currently up to 800 G and higher.

Redesign of the tDF solution: modular central office solution now depth-adjustable

Dortmund/Germany, 29. September 2023. tde has revised its distribution frame solution tDF and designed it to be depth-adjustable: This enables the modular solution to also be suitable for installation situations in which there is too little space available in the patch area or the rear. The network expert has further redesigned the tDF sub rack: The side panels and guide plates of the housing are uniformly powder-coated black. A special design highlight includes the sides of the central fibre optic distributor now being red, tde’s corporate colour. The tDF offers the highest packing density in the smallest of spaces: network technicians can terminate up to 4032 fibres with LC connectors in 46 height units.

Das neue Steckerprogramm HEB von tde zeigt nach einem kompletten Redesign eine deutlich bessere Performance.

For broadcast, industry, defence, oil & gas: new HEB lens connector series for application in harsh environments

Dortmund/Germany, 16. May 2023. tde – trans data elektronik GmbH presents the new HEB connector range, a completely revised lens connector series for a wide range of applications in the broadcast and industrial environment, the oil and gas industry and the defence sector. The connectors are based on Hermaphroditic Expanded Beam (HEB) technology, thus guaranteeing the use of optical data transmission even under very harsh environmental conditions. tde has also optimised the performance of the single- and multimode lens connectors. The HEB connectors in size M (HEB-M) are most common on the market and are also known as HMA, these are fully compatible with each other. They fully comply with the MIL-DTL-83526 standard and can be purchased from 2 to 12 channel versions. Alternatively, lens connectors are available in sizes S, L and XL.

Impressionen des SWAN Messestandes auf der LogiMAT 2022.

LogiMAT 2023: SWAN Demonstrates User-Centric SAP Solutions for Digital Intralogistics

Augsburg, March 27, 2023 – SWAN GmbH presents itself and its intralogistics solutions based on the SAP EWM and SAP TM modules as innovative, automated, and user-centric at LogiMAT 2023. As a project house for SAP logistics, the company focuses on the topic of “usability,” with the innovative core product, SWAN 3D Logistics Cockpit, taking center stage. Additionally, SWAN provides insights into the future corporate strategy and showcases successfully implemented projects at international companies in the automotive, pharmaceutical, fashion, and food industries, including Brose, BASF, Triumph, and Apetito. SWAN can be found in hall 8 at booth D47.

Bild tde Masterspleissbox / master splice box

For up to 288 splices: tML fibre optic splice box offers the industry’s highest packing density in one height unit

Dortmund/Germany, 27. March 2023. tde – trans data elektronik GmbH has completely revised the tML master splice box and designed it for an even higher packing density with a compact design and effortless installation: instead of 144 splices in one height unit, 288 splices can now be accommodated. Network technicians can splice these to an indoor or outdoor cable via MPO/MTP pigtails in a space-saving manner, up to 12 times 24. The solution is particularly suitable for application in data centres, telecom or FttX sectors, as well as for campus cabling where either required cable lengths cannot always be determined in advance, or structural conditions do not permit length determination. In combination with the modular cabling systems tML Standard, tML Xtended, tML 24 and MDC or SN modules, companies save valuable space in the rack. The tML fibre optic master splice box can also be used independently of tML system platforms.